Product Range


Sponge Iron

Ferro Alloys

MS Billets and Blooms

TMT Bars & Structures

Wire Rod



HOME  PRODUCT RANGE  /  TMT Bars & Strcutures

Thermo mechanically treated reinforcement bars are manufactured through three stages where subsequent heating and cooling process creates a combination of micro-structural features in the cross section of the bar. This gives superior yield strength to the bar with magnificent ductility and weldability. This process is a patented technology from HSE, Germany under the brand name of “Thermex”.

Salient Features
bullet Made from best Quality Steel texture Billets from virgin process not the recycle steel
bullet Extra elongation and tensile strength compared to BIS and ordinary TMT bars in market. It ensures 15% savings in steel consumption
bullet Very competitive in price compared to quality TMT Bars available in market
bullet Due to presence of high manganese and good chemical composition, it ensures higher durability and bendability
bullet Due to better physical properties and equidistant well designed ribs, it ensures better grip with concrete
bullet Due to its thermo mechanical treatment, through German technology based Thermex Process it is highly rust and corrosion resistant and best for humid and coastal areas
bullet Due to all these features it is used in domestic construction, engineering, power railway, automotive and defense sector. It also has wide acceptability in the export market


Value for money with Fe 415

SEL TMT Fe 415 Rebars are high strength reinforcement bars ideal for Schools, Warehouses, Office Buildings, Bridges, Dams and Power Plants.



More prominent ribs thereby causing higher AR values up to 100%-150% higher than traditional CTDs or other TMTs


Sectional weights very close to the nominal values specified in BIS code. This ensures higher meterage per unit weight


Suffers no loss of strength even at higher temperatures


Unique combination of strength, ductility and stress ratio enables these bars to be fire and seismic resistant


Steel Saving with Fe 500

SEL TMT Fe 500 Rebars are super quality special grade rebars with an increased tensile strength than Fe 415 grade. It ensures a reduction of up to 20% steel usage, the strength remaining the same. These are ideal for mega structures like flyovers, high-rises, power plants, dams, bridges, chimneys and other critical architectures. Fe 500 sizes in millimetre range from 8, 10, 12, 16, 20, 22, 25, 28, 32 to 36.



Specially created for high strength applications where high yield strength is required without compromising on elongation properties


The rib pattern is specially designed to ensure excellent bond strength between the bars and surrounding concrete


Due to presence of high manganese and good chemical composition, it ensures higher durability and bendability


As it ensures upto 20% of steel usage, it’s more economic than other Fe 415 or other TMTs

Why we are superior :

Bend ability : SEL Thermex TMT Bars exhibit very high bend ability due to low carbon content and high bend ability due to lower carbon content and higher elongation. They can withstand bending and rebending with initial diameters of 1D and 4D respectively, where D= Diameter of Bar.It is easier to work with these bendability.

Rust and Corrosion Resistant:

The main reason for failure in any reinforcement concrete structure is due to corrosion of the Tor Steel in the concrete ,where these steel corrode in exsistance of chloride ions.SEL Thermex TMT Bar due to its Thermo mechanical Treatment are very highly rust and corrosion resistant and is best suited in the humid and coastal states like West Bengal and Orissa

Cost Saving:

SEL Thermex TMT Bars are very cost effective and saves steel upto 20% being technical superior and having higher tensile strength than other TMT Bars.


SEL Thremex TMT Bars are much superior to conventional Tor steel by virtue to their various engineering properties and can be used for Residential building,Bridges,Dams,Industrial Establishments and all types of concrete reinforcement purposes.



Round bars are specially rolled high quality structural bars. These are highly bendable, ductile and easily weldable. Wire rods are rolled alloy or non-alloy steel product, produced from a semi (e.g. bloom) and having a round, rectangular or other cross-section. Particularly fine cross-sections may be achieved by subsequent cold forming (drawing). Structurals are rectangular metal beams, used in construction works.

  • Sections are rolled strictly as per IS 2062 : 2006
  • Products are rolled strictly in accordance to IS 808 : 1989
  • All products are rolled in dimensions according to IS 1852 : 1985
  • Sections are rolled from fully killed MS Billets manufactured in-house. The carbon equivalent in the material is as low as 0.2% ensuring high weldability of the products
  • Sections rolled are of high strength ranging from 410 MPA to 600 MPA owing to high manganese content
© Shyam Group.2008 - 2009. All Rights Reserved.